Time for another baby quilt! This one is off to Baby D, son of my friends Savva and Yanna. This is my original design. I have written out the pattern if you would like to make one for a little cherub in your neighborhood.
 |
| Scotch Twist 32" x 32" |
 |
| Scotch Twist Closer View of Center Square |
Scotch Twist Quilt
Size:
32” x 32”
By
Mary Lachman
Quilt
designed by Mary Lachman
Quilt
made by Mary Lachman
Materials Needed
·
2 dark fat
quarters – chose floral, novelty or stripes to contrast with the light fabrics
and sashing
·
2 light fat quarters
·
1/3 yard dark
fabric for sashing
·
Scrap fabrics to
blend with the dark and light fat quarters
·
¼ yard for
binding
·
1 yard backing
fabric – or use the excess fabric from the fat quarters to piece the back
·
36” square quilt
batting
·
Thread to match
fabrics
·
Hand or machine
quilting thread
Tools Needed
·
Ruler
·
Rotary cutter and
mat
·
Scissors
·
pencil
·
Iron and ironing
board
Cutting and Piecing Directions
Step One: Cut the Fabric Pieces
1. All measurements include ¼”
seam allowance.
2.
Cut out the
fabric pieces
3.
Cut the fabric
along the crosswise grain the total width of your fabric.
4.
Cut eighteen 4
7/8” squares from dark and light fat quarter ( note to self: can get 12- 4 7/8”
squares out of each FQ).
5.
Cut eight 1 ½”
strips from dark sashing fabric.
6.
Cut four 2 ½”
strips from binding fabric.
7.
Cut remaining
scraps into 2 ½”strips for pieced border
Step Two: Piece the Quilt Blocks Note: all dimensions on the cutting chart are cut
size. The number at the top of each column is the width of each cut in that
column
Make Half Square Triangles (HSTs)
1.
Layer one dark 4
7/8” square with one light 4 7/8” square, right sides facing.
2.
With a pencil,
draw a diagonal line from one corner to another of the light square.
3.
Stitch a 1/4” on
each side of the diagonal line.
4.
Use rotary cutter
to divide the HST on diagonal pencil line. Each 4 7/8” square will yield two 4
½” HST squares. Press seam toward dark fabric.
Make Pinwheel Blocks
1.
Arrange four, 4
½”HST squares, alternating dark and light corners to form resemble pinwheels.
2.
Stitch two
squares together. Press seam.
3.
Stitch other two
squares together. Press seam.
4.
Stitch each of
the two squares into a 4 square pinwheel unit. It should measure 8 ½” square.
5.
Arrange pinwheel
blocks on design wall or floor to check arrangement.
Sash in Between Pinwheel Blocks
1.
Stitch 1 ½” strip
to one side of six pinwheel blocks.
2.
Press seam toward
1 ½” strip.
3.
Align other side
of 1 ½” strip on one block to un-sashed opposite side of another block. (You
will be matching 3 to 3.)
4.
Stitch
together. (Your section of blocks
will be: pinwheel-sash-Pinwheel-sash).
5.
Stitch another
pinwheel block to the end sash of each line of blocks
(pinwheel-sash-pinwheel-sash-pinwheel)
6.
Stitch two 1 ½” x
44” strip in between each row of pinwheel-sash-pinwheel-sash-pinwheel. Trim off
excess of 44” strip even with the end of blocks.
Add Outer Borders
1.
Strip piece 2 ½”
wide short lengths of medium and light scrap fabrics end to end until piece
measures 24” long. Add a 2 ½” x 6” length of the same color of fabric to each
end. Make a total of 4 strips like
this one.
2.
Stitch a 1 ½” x
44” strip to one of the scrappy strips made in the first step.
4.
Repeat steps 2
and 3, three more times.
5.
Stitch borders
on, miter corners if you prefer.
Make a Quilt Sandwich and Quilt
1.
Sandwich quilt
top, batting and backing together.
2.
Pin to hold in
place.
3.
Quilt as desired.
The sample was quilted by hand ¼” from each of the seams.
Bind
1.
Stitch four 2 ½”
fabric binding strips end to end. Press seams open.
2.
Fold and press
the strip in half lengthwise.
3.
Place binding on
right side of quilt matching raw edges of binding to edge of quilt.
4.
Stitch the
binding onto the quilt ¼” from edge.
5.
Fold binding over
to back of quilt.
6.
Finish by stitching
binding to back by hand or machine.
